Introduction

For truck drivers, keeping your truck clean is a mammoth task. Unlike smaller cars or personal vehicles, trucks are large, and they’re often filled to the brim with things. Sometimes these things leave terrible stains that are very hard to get rid of. So, keeping your truck clean is a relatively complex task. Since your truck comes in contact with a plethora of stains, not keeping it clean regularly creates the risk of contamination. While truck cleaning chemicals help clean your truck, you still need to put some effort into keeping your vehicle clean. In this article, we’re going to discuss the steps to thoroughly clean your truck. Let’s begin! 

Steps to Clean Your Truck:

Make sure The Truck is cool:

Before you start cleaning your car, make sure it’s at the optimum temperature. If your truck was in use for a long time or was left in the sun for too long, cleaning it right then might not be a good idea.

Since the parts of the car are warm, coming in contact with cold water might make the rotors warp and stop working. Thus, causing more harm than good. So, always make sure that your car has been rested long enough and it’s at room temperature. 

Rinse it Thoroughly: 

To begin with, you have to give your car a thorough rinse before you apply any truck cleaning chemicals or other cleaning materials. Since your truck is outdoors most of the time, it comes in contact with a lot of dirt and dust that can be removed by a simple rinse. Leaving the dust on the exterior of the truck for too long will damage the material. It can also cause rust or make the metal disintegrate.

However, make sure the water isn’t too warm or has high pressure. In that case, the water can cause dents or damage the colour of your truck. However, don’t shy out of using water. Make sure you’re using a lot of water to clean all the dust and dirt away. 

Apply Soap or Shampoo:

One of the most essential truck cleaning chemicals out there is the soap or shampoo you use on your truck’s exterior. Make sure you have a mild shampoo that’s good for the material of your vehicle and suitable for all paint types. Using dish soap or detergent as an alternative to car cleaning shampoo is never a good idea since the exterior of a vehicle is very different from that of clothes or utensils.

When you’re applying your cleaning products, make sure you’ve created enough lather and thoroughly coated the truck’s surface. The foam will seep into the material and give it a thorough clean. Use a soft microfiber mitt, towel, or sponge to slowly apply the soap to the body of your truck. Keep the sponge clean by rinsing it regularly. If it gets dirty, it will spread dirt instead of cleaning your truck.

Once you’re done applying your chemical, rinse it off with water again. Ensure all the soap has been cleaned, and there’s no residue left anywhere on your car. Now that the body has been cleaned move on to the next step!

Wash the Wheels: 

In most cases, the wheels are the dirtiest part of your truck. They’re always running over dirt, mud and will accumulate a fair amount on them as well. So, cleaning your wheels is a must when you’re cleaning your truck. 

Generally, truck wheels are bigger than car wheels and thus require a bit more effort. To begin with, use a long wheel cleaning brush to apply soap thoroughly all over your wheels. Use the brush to reach the corners and parts where the soap can’t reach.

Once you’ve applied the soap, rinse off the soap and give the wheels a thorough wash. Also, we recommend that you use a hosepipe to reach the holes and far corners of the wheels for a better clean.

Sweep the Truck Bed:

Now that the exterior is cleaned, it’s time to deal with the most complicated part of your truck, the truck bed. Since your truck bed has been used to carry things here and there, it might have a fair bit of dirt on it, and it needs a thorough clean.

Firstly, use a broomstick to sweep away any visible dirt, leaves, remainings, or whatever you see in front of you. However, make sure to cover your eyes and mouth to prevent anything from getting into your mouth or eyes. 

Rinse the Bed:

Now that all the visible trails and tracks of dirt are removed from the bed of your truck, it’s time to give it a proper clean. Take a pressure washer and rinse the bed. Ensure the water pressure isn’t too high, or it would damage the bed’s surface. Rinse it thoroughly and make sure the surface is wet.

Apply Cleaning Materials on the Bed:

Now that the bed is wet, it’s time to apply your truck cleaning chemicals on your truck bed. Since the car surface is already wet, take your favourite cleaner and thoroughly use it in your car.

Similar to the exterior, apply the soap on your bed with a microfiber mitt and let the soap stay for a while. Afterwards, use your pressure washer to rinse away all the soap. 

Dry Your Truck:

Drying the body of your truck is not always a pleasant experience. It takes a lot of time, and you have to make sure it doesn’t get dirty in the drying process again. While you can dry it by keeping it under the sun, you can also use a blower to dry the water from the exterior of the truck. 

You can use a chamois cloth to dry the bed. Use it to soak all the water to dry it out quickly. Once the bed and the exterior have dried out, apply wax to keep it shiny. With that, you’re done cleaning. 

Conclusion:

When it comes to cleaning vehicles, cleaning a truck is probably the hardest. However, if you follow these steps and use your truck cleaning chemicals to good use, you’re gonna have a good time! We hope you find this article helpful!